Pin It

Reduce Damages by Contacting an Emergency Plumber in Mclean at the First Sign of Failure

Plumbing problems can often happen unexpectedly. One reason for this is the constant pressure that fresh water piping is under. The average pressure in a municipal system runs between twenty and forty PSI. This may seem low, but water isn’t compressible and when the liquid has nowhere to go it might cause some impressive failures. Thankfully, this rarely happens since opening a tap will take off some of that pressure. Pressurized water supplies are important to ensure that every home has a constant source of water. Unfortunately, when they fail, expect to call for an Emergency Plumber in Mclean. Otherwise, the building may be without water until an expert can remedy the fault.

One of the more common reasons to seek out an Emergency Plumber in Mclean is a broken water main. This type of damage may be a gradual failure from people driving over the pipe or the sudden, accidental damage that might occur when digging around in the lawn. The water main is the primary pipe between the local water supply connection and the building. When it breaks, it usually does so with a flair. In fact, water tends to saturate the soil very fast, and this much water could easily cause foundation concerns. The first step in resolving the disaster is to shut off the main connection as quickly as possible.

One type of leak that people rarely think about is sewage seepage. This type of problem often happens because the sewer line is a low-pressure system. That is, the waste and effluent move by the force of gravity and the pressure from any waste behind it. This can cause problems when the sewage moves too slowly, and a clog begins to form. A rather messy situation that happens much faster than people realize because the solids that tend to accumulate are the same ones that usually block the progress of other waste. This, in turn, makes the clog larger, and the cycle repeats. The plumber usually has the good fortune of locating the problem before things get this bad. But this usually means the use of a video snake to inspect the sewage pipe. In most cases, a leak in this pipe is usually just roots forcing one of the joints apart and reducing the flow of sewage. Visit the experts at AllPlumbing.com for more details or to find solutions to those pesky plumbing problems.

Leave a Reply

Your email address will not be published. Required fields are marked *