With a Water
Heater in South Hills PA, a little maintenance can go a long way. The
best way for a homeowner to avoid getting left out in the cold is to
know the signs that their water heater is about to fail. Keep reading
to find out what those signs are.
No Hot Water
Does the shower or bath water feel lukewarm? Does it take too long to get warm or hot water out of the tap? One of the most common signs of a Water Heater in South Hills PA that is about to fail is insufficient hot water.
The majority of
units have a storage tank that is 30 to 50 gallons. As the water is
heated up by an electric or gas source, water minerals separate and
settle at the base of the storage tank. As time passes, minerals
build up in the tank, creating a barrier between the burner and the
water, which means less and less heat can reach the water, causing
showers to get colder and colder.
The more sediment
that builds up, the harder the heating element in the tank has to
work. At some point, the tank is going to fail. The result is having
to completely replace the unit.
culprit of water heater failure is strange sounds. If the water
heater is making any rumbling, creaking, or popping sounds, it is
best to call a plumber for help. Mineral buildup and hard water are
also to blame when it comes to noises from a unit.
The popping sound
made by a water heater is caused by minerals that form on the
surface. The sound is a result of pockets of air present in the
sediment layer boiling along with the water in the tank.
Don’t underestimate the benefits offered by knowing when a water heater is going to fail and the issues that it may have along the way. More information about water heater failure can be found by reaching out to the team at South Side Plumbing & Heating. Being informed is the best way to ensure this issue is remedied. You can connect with them on Facebook for more updates!